Audio Box LiPo Upgrade Kit - $179.99

The 'Add to Cart' button is disabled because you have non-MJG Initiator items in your cart. MJG Initiators require their own shipping due to hazmat regulations. To purchase them, either complete your current order first or remove the other items from your cart. Learn more.
The 'Add to Cart' button is disabled because you have MJG Initiators in your cart. They require their own shipping due to hazmat regulations. To purchase other items, either complete the MJG Initiators order first or remove them from your cart. Learn more.

The Audio Box LiPo Upgrade Kit is used to upgrade any Audio Boxes purchased prior to November 2021 to include the LiPo recharge function and 1.4" screen.

The built-in 2,000 mAh LiPo battery improves the life of the Audio Box from around 2 hours using AA batteries to 10 hours.

The charger both powers and charges the unit at the same time. You can leave the charger plugged in during a show to ensure constant full power.

The 1.4" screen allows you to easily see signal strength, battery life, and audio filename/position.

The upgrade process is performed with only a screwdriver and a bit of patience; unscrew the Audio Box faceplate, remove the mainboard, plug it into the upgrade kit, add the battery, and reassemble.

Firmware 5.1.4 or higher is required to use the Audio Box with LiPo. If you own equipment on a lower firmware version, you will need to upgrade the equipment to 5.1.4 to use with the Audiobox with LiPo.

View Audio Box LiPo Upgrade Kit Installation Guide View LiPo Battery FAQ


What's Included
Related Products

Your Audio Box LiPo Upgrade Kit will include the below:

  • Faceplate with 1.4" Screen
  • Required harnesses (attached to faceplate)
  • 4 x 1" standoffs (attached to faceplate)
  • 4 x 1/4" screws
  • 14.8V 200mAh LiPo Battery
  • LiPo Charger (Choice of region)