MJG Firewire Initiator with Visco Shroud - 3 ft (Box of 80)
- $67.19
The only non-regulated electric match on the market, MJG Initiators will perform exactly the same as traditional e-match, but without the need for any certification.
Visco Shroud Initiators come with a pre-installed tube that fuse is inserted into. Simply insert the fuse, apply tape, and your effect is ready to reliably fire.
Looking to wire Quickplugs igniters in series or parallel? Check out the Quickplug Breakout Board (Series) or Quickplug Series Breakout Board (Parallel) to make the process as simple as plugging in more quickplugs.
How long does it take to receive MJG initiators (and what is the difference between USPS and FedEx)?
When ordering MJG initiators, it is essential to factor in the shipping time. This is even more important around major holidays, as shipping times can be extended due to higher-than-average shipping volumes with USPS and FedEx.
Due to hazmat shipping regulations, we are not able to ship MJG Initiators outside of the United States at this time.
Shipping Option | Delivery Time | Surcharge, in addition to standard shipping fee |
FedEx Ground Hazardous Shipping | 1 - 5 Business Days | $25.50 |
FedEx Priority Overnight Hazardous Shipping | Next business day | $80 |
USPS Parcel Select Hazardous | 2-3 Weeks, depending on the location | $3 |
MJG Firewire Initiator w/ Visco Shroud - 3 ft (Box of 80) - Standard (Wires)
Qty | |||
Per Box | Per Initiator | ||
1 (80) | $67.19 | $0.84 | |
2 - 3 (160 - 240) | $65.85 | $0.82 | Save $1.34 per box, $0.02 per Initiator |
4 - 6 (320 - 480) | $65.18 | $0.81 | Save $2.01 per box, $0.03 per Initiator |
7 - 10 (560 - 800) | $64.51 | $0.81 | Save $2.68 per box, $0.03 per Initiator |
11 - 15 (880 - 1200) | $63.84 | $0.80 | Save $3.35 per box, $0.04 per Initiator |
16 - 19 (1280 - 1520) | $62.49 | $0.78 | Save $4.70 per box, $0.06 per Initiator |
20 - 24 (1600 - 1920) | $61.15 | $0.76 | Save $6.04 per box, $0.08 per Initiator |
25 - 29 (2000 - 2320) | $59.80 | $0.75 | Save $7.39 per box, $0.09 per Initiator |
≥ 30 (2400) | $59.13 | $0.74 | Save $8.06 per box, $0.10 per Initiator |
MJG Firewire Initiator w/ Visco Shroud - 3 ft (Box of 80) - Quickplugs
Qty | |||
Per Box | Per Initiator | ||
1 (80) | $79.99 | $1.00 | |
2 - 3 (160 - 240) | $78.40 | $0.98 | Save $1.59 per box, $0.02 per Initiator |
4 - 6 (320 - 480) | $77.60 | $0.97 | Save $2.39 per box, $0.03 per Initiator |
7 - 10 (560 - 800) | $76.80 | $0.96 | Save $3.19 per box, $0.04 per Initiator |
11 - 15 (880 - 1200) | $76.00 | $0.95 | Save $3.99 per box, $0.05 per Initiator |
16 - 19 (1280 - 1520) | $74.40 | $0.93 | Save $5.59 per box, $0.07 per Initiator |
20 - 24 (1600 - 1920) | $72.80 | $0.91 | Save $7.19 per box, $0.09 per Initiator |
25 - 29 (2000 - 2320) | $71.20 | $0.89 | Save $8.79 per box, $0.11 per Initiator |
≥ 30 (2400) | $70.40 | $0.88 | Save $9.59 per box, $0.12 per Initiator |
Bridgewire Resistance | 1 ohm ± .2 ohms |
Maximum No-Fire Current | .30 amp. (300milliamp.) |
Minimum All-Fire Current | .60 amp (600 milliamp.) |
Recommended Minimum Firing Current | .75 amp |
Recommended Nominal Firing Current | 1.00 amp |
Maximum Test Current | .04 amp (40 milliamp.) |
Series/Parallel Firing
Voltage Mode | Series | Parallel |
---|---|---|
9V | 6 | 2 |
14.8V LiPo | 6 | 4 |
12V External | 6 | 3 |
18.5V External | 6 | 5 |
24V External | 6 | 6 |